Having had an opportunity to test Marantz NR1710 vs Yamaha RX-A880, I’d like to share my impression here to facilitate your choice of a new AV receiver.
AV receivers under review have the same number of channels. In terms of power, there are differences, the NR1710 has such a ratio W/Ohm - 50/8, 70/6, while the RX-A880 has a power of 100/8, 160/4. The value of total harmonic distortion is also different, and for the NR1710 it is 0.08%, but for the RX-A880 it is 0.06%.
The manufacturer installed different DACs, the NR1710 received the model 192 KHz/32-bit, but the RX-A880 is equipped with Burr-Brown 384 KHz/32-bit. Each of the compared opponents supports Bi-amping. Both Marantz NR1710 and Yamaha RX-A880 can transmit an audio signal directly to the amplifier and bypasses any DSP processing.
These units have the same Wi-Fi modules. Each of the receivers has a Bluetooth connector. Both devices can work with such Apple Music services: AirPlay, AirPlay 2. Access to the Spotify service is on each of the competitors. The number of available streaming services varies for receivers, the Marantz NR1710 works with Deezer, TIDAL, Pandora, Napster, SiriusXM, TuneIn Radio, but the Yamaha RX-A880 works with Deezer, TIDAL, Pandora, Napster, SiriusXM, Qobuz.
The HDR10 function is present in each of the rivals. The quality of 4K/60Hz signal remains unchanged when transmitting from a source to a TV or projector via HDMI for both receivers. Signaling over HDMI in standby mode can provide the NR1710 and the RX-A880. Each of the devices can increase the resolution of the incoming video signal. Each of the participants of the comparison has a Dolby Vision.
The number of HDMI inputs/outputs varies depending on the receiver, the NR1710 has 8/1, and the RX-A880 has 7/2. HDMI Audio Return Channel is implemented in both devices. HDMI eARC is supported by the NR1710 and the RX-A880. When comparing receivers, it becomes clear that each of the rivals can work with HDMI CEC. The NR1710 has support for the standard HDCP 2.3, compared to the RX-A880, which supports the standard HDCP 2.2. Like most receivers, our models have a built-in phono stage for connecting a vinyl player.
Ability to create 2 Multi zones inherent in both AV receivers. For voice control in the NR1710 is used Amazon Alexa, Google Assistant, Siri, Josh.AI, but in the RX-A880 is used Amazon Alexa, Google Assistant. There is an ECO mode in either AV receiver. The Marantz NR1710 and the Yamaha RX-A880 can be properly configured using the setup assistant.
A Dolby Atmos multichannel audio format is available both models. A DTS:X surround technology is supported by devices from our comparison.