Yamaha RX-V385BL vs Denon AVR-S970H – that is a question.
The number of channels for receivers is different - 5.1 versus 7.2, respectively, for devices. In terms of power, there are differences, the RX-V385BL has such a ratio W/Ohm - 70/8, 145/6, while the AVR-S970H has a power of 90/8, 125/6. The value of total harmonic distortion is also different, and for the RX-V385BL it is 0.09%, but for the AVR-S970H it is 0.08%.
The manufacturer installed different DACs, the RX-V385BL received the model Burr-Brown 384 KHz/32-bit, but the AVR-S970H is equipped with 192 KHz/32-bit. The Bi-amping function is implemented only in the Denon AVR-S970H. The model AVR-S970H can transmit an audio signal directly to the amplifier and bypasses any DSP processing. Each of the receivers has a Bluetooth connector. The AVR-S970H has access to the Spotify service.
Signaling over HDMI in standby mode can provide the RX-V385BL and the AVR-S970H. Each of the devices can increase the resolution of the incoming video signal. Each of the participants of the comparison has a Dolby Vision.
The number of HDMI inputs/outputs varies depending on the receiver, the RX-V385BL has 4/1, and the AVR-S970H has 6/2. HDMI Audio Return Channel is implemented in both devices. HDMI eARC is supported by the RX-V385BL and the AVR-S970H. When comparing receivers, it becomes clear that each of the rivals can work with HDMI CEC. RX-V385BL and AVR-S970H support the standard HDCP 2.3. In the presence of a built-in phono stage for connecting a vinyl player only at Denon AVR-S970H. There is an ECO mode in either AV receiver. The Denon AVR-S970H can be properly configured using the setup assistant.
A Dolby Atmos multichannel audio format is available only in the AVR-S970H. Only in the AVR-S970H realized a DTS:X surround technology.