Sony STR-DH790 vs Marantz SR5010 – that is a question.
AV receivers under review have the same number of channels. In terms of power, there are differences, the STR-DH790 has such a ratio W/Ohm - 90/6, while the SR5010 has a power of 100/8, 140/6. The value of total harmonic distortion is also different, and for the STR-DH790 it is 0.09%, but for the SR5010 it is 0.08%.
The manufacturer installed different DACs, the STR-DH790 received the model 192 KHz/24-bit, but the SR5010 is equipped with 192 KHz/32-bit. Each of the compared opponents supports Bi-amping. Both Sony STR-DH790 and Marantz SR5010 can transmit an audio signal directly to the amplifier and bypasses any DSP processing.
Wireless Internet connection via WIFI is only possible with SR5010. Each of the receivers has a Bluetooth connector. The SR5010 has access to the Spotify service. The quality of 4K/60Hz signal remains unchanged when transmitting from a source to a TV or projector via HDMI for both receivers. Signaling over HDMI in standby mode can provide the STR-DH790 and the SR5010. Video scaling is only possible with the SR5010. Each of the participants of the comparison has a Dolby Vision.
The number of HDMI inputs/outputs varies depending on the receiver, the STR-DH790 has 4/1, and the SR5010 has 8/2. HDMI Audio Return Channel is implemented in both devices. HDMI eARC is only supported by the STR-DH790. When comparing receivers, it becomes clear that each of the rivals can work with HDMI CEC. STR-DH790 and SR5010 support the standard HDCP 2.2. Unlike most receivers, our models do not have a built-in phono stage for connecting a vinyl player. Voice control of the basic functions of the receiver is not realized in both models. There is an ECO mode in SR5010. The Sony STR-DH790 and the Marantz SR5010 can be properly configured using the setup assistant.
A Dolby Atmos multichannel audio format is available both models. A DTS:X surround technology is supported by devices from our comparison.