What is better - Onkyo TX-8020 vs Cambridge Audio Topaz SR10?
AV receivers under review have the same number of channels. In terms of power, there are differences, the TX-8020 has such a ratio W/Ohm - 90/6, while the Topaz SR10 has a power of 85/8. The value of total harmonic distortion is also different, and for the TX-8020 it is 0.03%, but for the Topaz SR10 it is 0.01%. None of the compared opponents supports Bi-amping. The model TX-8020 can transmit an audio signal directly to the amplifier and bypasses any DSP processing. None of the AV receivers have an auto speaker calibration support.
Wireless connection to the Internet via WIFI can not be performed on these receivers. The Bluetooth connector is not installed in either the TX-8020 or the Topaz SR10. Spotify is not available for these receivers.
Oddly enough, the support for the HDR function is not implemented in these units. Based on these AV receivers, it is not possible to transmit a 4K signal from the source to the TV or projector. HDMI signal transmission in standby mode is not possible with these models. None of the devices can increase the resolution of the incoming video signal. Review participants do not have the Dolby Vision feature. HDMI Audio Return Channel is not supported by either the Onkyo TX-8020 nor the Cambridge Audio Topaz SR10. HDMI eARC is not supported by the TX-8020 and the Topaz SR10. When comparing receivers, it becomes clear that HDMI CEC support is not implemented. Like most receivers, our models have a built-in phono stage for connecting a vinyl player. Voice control of the basic functions of the receiver is not realized in both models. There is an ECO mode in neither AV receiver. None of these units can be properly configured using the setup assistant.
Generally no support for a Dolby Atmos multichannel audio format. A DTS:X surround technology is not supported by devices from our comparison.