The Onkyo TX-NR676 vs Onkyo TX-SR343 comparison will be extremely helpful for people who want to get a great, powerful receiver with many functions.
The number of channels for receivers is different - 7.2 versus 5.1, respectively, for devices. In terms of power, there are differences, the TX-NR676 has such a ratio W/Ohm - 165/6, while the TX-SR343 has a power of 100/6. A common feature for devices is the same total harmonic distortion - 0.08%.
The manufacturer installed different DACs, the TX-NR676 received the model AK4458 384 KHz/32-bit, but the TX-SR343 is equipped with TI Burr-Brown 192 KHz/24-bit. The Bi-amping function is implemented only in the Onkyo TX-NR676. The model TX-NR676 can transmit an audio signal directly to the amplifier and bypasses any DSP processing. Each of the receivers has a Bluetooth connector. The TX-NR676 has access to the Spotify service. The quality of 4K/60Hz signal remains unchanged when transmitting from a source to a TV or projector via HDMI for both receivers. Signaling over HDMI in standby mode can provide the TX-NR676 and the TX-SR343. None of the devices can increase the resolution of the incoming video signal. Operation with the Dolby Vision is only possible with the TX-NR676.
The number of HDMI inputs/outputs varies depending on the receiver, the TX-NR676 has 7/2, and the TX-SR343 has 4/1. HDMI Audio Return Channel is implemented in both devices. HDMI eARC is not supported by the TX-NR676 and the TX-SR343. When comparing receivers, it becomes clear that each of the rivals can work with HDMI CEC. TX-NR676 and TX-SR343 support the standard HDCP 2.2. In the presence of a built-in phono stage for connecting a vinyl player only at Onkyo TX-NR676. Voice control of the basic functions of the receiver is not realized in both models. There is an ECO mode in TX-NR676. The Onkyo TX-NR676 can be properly configured using the setup assistant.
A Dolby Atmos multichannel audio format is available only in the TX-NR676. Only in the TX-NR676 realized a DTS:X surround technology.