Yamaha RX-V385 vs Onkyo TX-SR383 – that is a question.
The number of channels for receivers is different - 5.1 versus 7.2, respectively, for devices. In terms of power, there are differences, the RX-V385 has such a ratio W/Ohm - 70/6, while the TX-SR383 has a power of 100/8, 135/6. A common feature for devices is the same total harmonic distortion - 0.09%.
The manufacturer installed different DACs, the RX-V385 received the model Burr-Brown 384 KHz/32-bit, but the TX-SR383 is equipped with 192 KHz/24-bit. None of the compared opponents supports Bi-amping. The model RX-V385 can transmit an audio signal directly to the amplifier and bypasses any DSP processing.
Wireless connection to the Internet via WIFI can not be performed on these receivers. Each of the receivers has a Bluetooth connector. Spotify is not available for these receivers. The quality of 4K/60Hz signal remains unchanged when transmitting from a source to a TV or projector via HDMI for both receivers. Signaling over HDMI in standby mode can provide the RX-V385 and the TX-SR383. Video scaling is only possible with the RX-V385. Operation with the Dolby Vision is only possible with the RX-V385.
The number of HDMI inputs/outputs is the same - 4/1. HDMI Audio Return Channel is implemented in both devices. HDMI eARC is only supported by the RX-V385. When comparing receivers, it becomes clear that each of the rivals can work with HDMI CEC. RX-V385 and TX-SR383 support the standard HDCP 2.2. Unlike most receivers, our models do not have a built-in phono stage for connecting a vinyl player. Voice control of the basic functions of the receiver is not realized in both models. There is an ECO mode in RX-V385. None of these units can be properly configured using the setup assistant.
Generally no support for a Dolby Atmos multichannel audio format. A DTS:X surround technology is not supported by devices from our comparison.